|
#include <SPI.h>
#include <WiFi.h>
#include <HTTPClient.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Adafruit_ADS1X15.h>
#include <EEPROM.h>
#include "anniebitmap.h"
int activeConnection = 1;
// hansen
const String ssid1 = "chewme2g";
const String password1 = "1355311355";
// silo
const String ssid2 = "asus2G";
const String password2 = "iqpqw41396";
const String heartbeatUrl = "https://homelab.impressto.ca/silopower/heartbeat.php";
const String pressureUrl = "https://homelab.impressto.ca/silopower/set_water_pressure.php?data=";
#define EEPROM_SIZE 4
int eepromPingsAddress = 0;
float totalServerPings = 0;
int eepromFailedPingsAddress = 1;
float totalServerPingFails = 0;
int eepromActiveConnection = 1;
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define LOGO_HEIGHT 128
#define LOGO_WIDTH 64
// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
#define OLED_RESET - 1 // Reset pin # (or -1 if sharing Arduino reset pin)
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, & Wire, OLED_RESET);
Adafruit_ADS1115 ads;
long secondsOfHour = 0;
const int secondsPerHour = 3600; // set to 60 for debugging
const int pulseRate = 1000; // loop runs once per second
const int serverSendInterval = 10; // 10 minutes between sending a voltage update to the server
const int samplesPerReading = 60 * serverSendInterval; // every x minutes send a sample to the server
int loopCount = 0;
String payload = "";
int httpCode = 0;
bool wifiConnected = false;
bool wifiPaused = false;
int wifiPausedTick = 0;
bool wifiSleeping = false;
bool debug = false; // when true server does not update
bool serverFailed = false;
int wifiConnectionAttempts = 0;
float basePressureVoltage = 0.46;
float totalledAveragePressure = 0;
float averagePressure = 0;
HTTPClient http;
void setup() {
Serial.begin(115200);
// SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
Serial.println(F("SSD1306 allocation failed"));
for (;;); // Don't proceed, loop forever
}
if (!ads.begin()) {
Serial.println("Failed to initialize ADS.");
while (1);
}
display.clearDisplay();
display.drawBitmap(0, 0, epd_bitmap_annie, 128, 64, 1);
display.display();
delay(3000);
//Init EEPROM
EEPROM.begin(EEPROM_SIZE);
activeConnection = EEPROM.read(eepromActiveConnection);
Serial.print("eepromActiveConnection :");
Serial.println(activeConnection);
if (isnan(activeConnection)) {
activeConnection = 1;
}
if (activeConnection == 0) {
activeConnection = 1;
}
Serial.print("activeConnection: ");
Serial.println(activeConnection);
float pingData = EEPROM.readFloat(eepromPingsAddress);
if (isnan(pingData)) {
pingData = 0;
}
totalServerPings = pingData;
EEPROM.end();
EEPROM.begin(EEPROM_SIZE);
float pingFailData = EEPROM.readFloat(eepromFailedPingsAddress);
if (isnan(pingFailData)) {
pingFailData = 0;
}
totalServerPingFails = pingFailData;
EEPROM.end();
if (!connectToWiFi()) {
delay(2000);
WiFi.disconnect();
delay(1000);
if (activeConnection == 1) {
activeConnection = 2;
} else {
activeConnection = 1;
}
connectToWiFi();
}
delay(2000); // Pause for 2 seconds
}
void loop() {
secondsOfHour++;
// after 24 hours reset this integer
if (secondsOfHour > 86400) {
secondsOfHour = 1;
// Serial.println("restarting :");
ESP.restart();
}
int16_t adc0;
adc0 = ads.readADC_SingleEnded(0);
float voltage = (adc0 * 0.1875) / 1000; //- basePressureVoltage);
float normalizedVolatage = voltage - basePressureVoltage;
if (normalizedVolatage < 0) {
normalizedVolatage = 0;
}
float pressure = normalizedVolatage * (30 - (normalizedVolatage * 3));
if (pressure < 0) {
pressure = 0;
}
totalledAveragePressure += pressure;
averagePressure = totalledAveragePressure / loopCount;
Serial.println("averagePressure: ");
Serial.println(averagePressure);
display.clearDisplay();
display.setTextSize(3);
display.setTextColor(WHITE);
display.setCursor(0, 0);
display.print("PSI: ");
display.println(pressure, 0);
display.println("");
display.setTextSize(1);
display.print("sensor volts: ");
display.println(normalizedVolatage, 2);
display.display();
/////////////////////
// SERVER RELAY
if (!debug && (loopCount >= samplesPerReading) || serverFailed) {
loopCount = 0;
setWifiSleepMode(false);
delay(2000);
// do a heartbeat check to see if we are online...
http.begin(heartbeatUrl);
httpCode = http.GET();
if (!httpCode > 0) {
// wifi may not be alive yet so wait 3 seconds
delay(3000);
}
String recordedPressure = String(averagePressure, 1);
recordedPressure.trim();
loopCount = 0;
http.begin(pressureUrl + recordedPressure);
httpCode = http.GET();
if (httpCode > 0) {
payload = http.getString();
Serial.println("HTTP Response: " + payload);
recordPingSucces();
} else {
recordPingFailure();
}
http.end();
setWifiSleepMode(true);
}
loopCount++;
delay(1000);
}
void testdrawbitmap(void) {
display.clearDisplay();
display.drawBitmap(0, 0, epd_bitmap_annie, 128, 64, 1);
display.display();
delay(3000);
}
bool connectToWiFi() {
String activeSsid = "";
String activePassword = "";
if (activeConnection == 1) {
activeSsid = ssid1;
activePassword = password1;
} else if (activeConnection == 2) {
activeSsid = ssid2;
activePassword = password2;
}
Serial.print("Connecting to WiFi: ");
Serial.println(activeSsid);
WiFi.begin(activeSsid, activePassword);
while (WiFi.status() != WL_CONNECTED && wifiConnectionAttempts < 20) {
delay(500);
Serial.print(".");
wifiConnectionAttempts++;
}
wifiConnectionAttempts = 0;
if (WiFi.status() == WL_CONNECTED) {
Serial.println("\nConnected to WiFi");
Serial.print("IP Address: ");
Serial.println(WiFi.localIP());
wifiConnected = true;
EEPROM.begin(EEPROM_SIZE);
EEPROM.write(eepromActiveConnection, activeConnection);
EEPROM.commit();
EEPROM.end();
Serial.print("set activeConnection to : ");
Serial.println(activeConnection);
return true;
} else {
Serial.print("Connection to ");
Serial.print(activeSsid);
Serial.println(" failed. Trying alternative");
return false;
}
}
/**
* set wifi sleep mode between data relays to conserve energy
* @param sleepMode - if true set wifi card to sleep to conserve energy
*/
void setWifiSleepMode(bool sleepMode) {
wifiSleeping = sleepMode;
if (sleepMode) {
WiFi.disconnect();
WiFi.setSleep(true);
delay(1000);
Serial.print("sleep wifi status: ");
Serial.println(wl_status_to_string(WiFi.status()));
} else {
WiFi.setSleep(false);
WiFi.reconnect();
delay(1000);
Serial.print("awaken wifi status: ");
Serial.println(wl_status_to_string(WiFi.status()));
// Check if the connection is still active. if not trigger wait for it to come back online
if (WiFi.status() != WL_CONNECTED && !wifiPaused) {
Serial.println("Connection lost. Attempting to reconnect in 1 minute ...");
WiFi.disconnect();
wifiPaused = true;
wifiConnected = false;
connectToWiFi();
}
}
}
/**
* record server ping success in long term memory
*/
void recordPingSucces() {
totalServerPings++;
EEPROM.begin(EEPROM_SIZE);
EEPROM.writeFloat(eepromPingsAddress, totalServerPings);
EEPROM.commit();
EEPROM.end();
wifiConnected = true;
serverFailed = false;
}
/**
* record server ping fails in long term memory
*/
void recordPingFailure() {
totalServerPingFails++;
EEPROM.begin(EEPROM_SIZE);
EEPROM.writeFloat(eepromFailedPingsAddress, totalServerPingFails);
EEPROM.commit();
EEPROM.end();
wifiConnected = false;
serverFailed = true;
}
/**
* ESP32 wifi card statuses
* @param status
* @return string
*/
String wl_status_to_string(wl_status_t status) {
String response = "";
switch (status) {
case WL_NO_SHIELD:
response = "WL_NO_SHIELD";
break;
case WL_IDLE_STATUS:
response = "WL_IDLE_STATUS";
break;
case WL_NO_SSID_AVAIL:
response = "WL_NO_SSID_AVAIL";
break;
case WL_SCAN_COMPLETED:
response = "WL_SCAN_COMPLETED";
break;
case WL_CONNECTED:
response = "WL_CONNECTED";
break;
case WL_CONNECT_FAILED:
response = "WL_CONNECT_FAILED";
break;
case WL_CONNECTION_LOST:
response = "WL_CONNECTION_LOST";
break;
case WL_DISCONNECTED:
response = "WL_DISCONNECTED";
break;
}
return response;
}
|
